B.E. CHEMICAL/ MECHANICAL FRESHERS JOBS <> ESSAR OIL LTD.- TRAINEE
February 29th, 2008 Posted by VFreshersEssar Oil Ltd. (EOL) is emerging as a leading integrated oil and gas company spanning the entire value chain, from deep within the earth all the way to the end-consumer. We have exploration and production (E&P) rights in some of India’s most valuable oil and gas blocks. EOL is building a state-of-the-art refinery and a countrywide network of modern retail fuel outlets.
Designation :Graduate Engineer Trainee
Job Description :B.E. in Chemical or Mechanical or Electrical or Instrumentation or Civil or Piping
Desired Profile : Fresh B.E.
Experience :0 Years
Education : B.Tech/B.E.Chemical, Civil, Electrical, Instrumentation, Mechanical, Petroleum
Location: Vadinar , Jamnagar
.
Contact bhavanay(at)essar.com
Website http://www.essar.com
Apply:
If you have registered your CV with Naukri.com CLICK HERE to apply
OR
CLICK HERE TO REGISTER YOUR CV with Naukri.com and then apply above
March 6th, 2008 at 1:33 pm
My name is Diptimayee patro. I am a mechanical engineer with 10 months experience in teaching line. I am very much interested to join in your company.
March 25th, 2008 at 12:45 pm
dear sir/mam
my name swapnaja kadu. i m mechanical engg, working in dharti Dredging And infrastructure Limited, hydearbad having 1 year exp , I M fresher , Just 2207 Pass out.
March 28th, 2008 at 9:32 am
My name is Pawan tiwari. I am a electrical engineer with 10 months experience in Project coordination. I am very much interested to join in your company
April 10th, 2008 at 10:35 am
dear
i m praveen n want to join yr power sector company but since fresher i cant help. what should i do
April 10th, 2008 at 11:39 am
visit vfreshers.com & submit ur cv at the link giv en in the job posting.
regards
vfreshers.com
April 21st, 2008 at 5:37 am
NARENDRA KUMAR
B.E. (Mechanical) pursuingContact no. : 09252820740E-mail: narendra_meengg.78630@yahoo.com Narendra.375@rediffmail.com Permanent address:Plot no. 2/248-249 kala kuan Housing Board Alwar (rajasthan)Alwar (Raj.)-301001
Career Objective
To pursue career with a company having a Global vision that could provide me an opportunity to implement the knowledge acquired & my talent in the relevant field,
Along with a proper balance between job satisfaction & status, eventually enhancing soundly my professional skills.
Educational Qualifications
B.E. (Mechanical) pursuing, from Laxmi Devi Institute of Engg & Technology, Alwar affiliated to the University of Rajasthan, Jaipur with 60% aggregate at the end of 3rd year.
Educational details
Educational qualification Year of passing Board / University % Obtained
B.E. 6th semester 2006-07 University of Rajasthan, Jaipur 58.0
B.E. 5th semester 2006-07 University of Rajasthan, Jaipur 57.9
B.E. 4th semester 2005-06 University of Rajasthan, Jaipur 60.2
B.E. 3rd semester 2005-06 University of Rajasthan, Jaipur 57.5
B.E. 1st year 2004-05 University of Rajasthan, Jaipur 64.0
Senior secondary 2002 Board of secondary education, Rajasthan (Ajmer) 48.0
Secondary 2000 Board of secondary education, Rajasthan (Ajmer) 67.5
Areas of interest
1 Internal Combustion Engine
2 Auto-mobile
3 Machine Drawing
Practical training :-
Status Duration Firm / Organization Description
Major training 45 days Amtek auto. Ltd, DHARUHERA “ Study of different production lines & their machining operations.”
Minor training 30 days Eicher Engines, Alwar Allotted a project entitled:“Developing Control Plan and SOP For Single Cylinder Assembly”.
Seminar
1 Geo–thermal energy.
Computer Proficiency
1 Language : C,C++.
2 Operating System : Win 98,XP,vista.
3 Software : Auto CAD.
3 General : Well versed with Internet fundamentals, MS-office.
Extra-curricular activities
Ø Tripped Govt. Polytechnic Alwar (RAJ.)
Personal Profile
1) Name : Narendra kumar
2) Fathers Name : Sh. Jagan Singh
3) Sex : Male.
4) Date of birth : 25th may 1986
5) Marital status : Single.
6) Language : English, Hindi
7) Strength : Enthusiastic, self motivated, disciplined & punctual
Sincear , hard working, honest, low tempered &
creative.
8) Hobbies : Playing chess & cricket, watching cricket, study , nobel
9) Contact No. : 09252820740
10) Address : 2/248 -249 kala kuan Housing Board Alwar
(Narendra kumar)
April 21st, 2008 at 7:22 pm
I am fresher in BE Mechanical. I am ready to work.
April 28th, 2008 at 6:04 am
My name is ram pradeep. I am a mechanical engineer with 9 months experience in teaching line. I am very much interested to join in your company. I am fresher , Just 2007 Pass out.
May 7th, 2008 at 12:18 pm
ASHISH PATEL
10 PASS COMPUTER HARDWARE ENG
Mo:9879744418
May 8th, 2008 at 3:40 pm
i m vagmee and i m a chemical engineer with 3 to 4 months experience in projects of CETP plants thats common effluent treatment plant for water purigying and i m very much interested to join this international company.
May 9th, 2008 at 8:54 am
My name is chandra shekar,I have enlightened my knowledge in chemical engineering(B.Tech) at Osmania University and Iam very much interested in joining in your company.
May 18th, 2008 at 4:00 am
I am a chemical engineer and will be in graduating in June-09. I have an aggregate of 55%. Can i apply in Essar? And if yes , when? The company comes for campus in MSU BARODA. So if can, will i get chance to sit for test along with others on the campus day?
May 29th, 2008 at 12:39 pm
hi,
I am B.Tech. mechanical engineer will be completed in june-08. I have an aggregate of 67% and i have 11months job experience.I am very much interested joining your company and i am from Rajkot.
June 21st, 2008 at 5:13 pm
iam fresher of sum 2008 in chemical eng wants to join in our company
July 20th, 2008 at 10:53 am
i am diploma in civil ,total 9 year experience .2 year gulf experience.
July 27th, 2008 at 11:31 am
COVER LETTER
Maharshi .S. Brahmbhatt
B-41 Jitendra Park,
B/H Bright School,
V.I.P.Road,
Karelibaug,
Vadodara-390018.
To,
H.R.M.
Dear Sir,
I am applying for a job in your organization for the required position.
I am a young, hard working and a committed person.
I have done my B.E. in Chemical Engineering from Shri S’ad Vidya Mandal Institute of Technology, Bharuch, (Veer Narmad South Gujarat University, Surat) and I am waiting for my results. I have also done my Diploma in Chemical Engineering from Dharmasinh Desai University, Nadiad.
I have attained 1 month training on Polybutadiene Rubber- II in IPCL, Vadodara during my degree. Also during my diploma I have attained training in the following manner:-
1) Low Density Polyethylene – IPCL, Vadodara ( 9 weeks.)
2) Polyvinyl Chloride – IPCL, Vadodara ( 9 weeks.)
I have also submitted a Project report on Polybutadiene Rubber during my B.E. (Final Semester).
I have also presented a Seminar on Enzymatic Hydrolysis of Heat Sensitive Oil during my B.E (VIIth Semester). Also I have prepared a Poster Presentation on Nanotechnology.
Thank you for your valuable time. I shall be pleased to furnish relevant information at your disposal.
Yours faithfully,
Maharshi .S. Brahmbhatt
Encl :- Resume
RESUME
Maharshi .S. Brahmbhatt
B-41 Jitendra Park, B/H Bright School, V.I.P.Road, Karelibaug, Vadodara-390018.
Date of Birth :- 27th Nov’ 1983
Gender :- Male
Marital :- Single
Status
Nationality :- Indian
Email Id :- Maharshi2711@gmail.com / Maharshi.brhmbhtt@gmail.com
Contact No. :- 9998817077 / 9427453453.
ACADEMICS :-
Veer Narmad South Gujarat University, Surat
Shri S’ad Vidya Mandal Institute of Technology, Bharuch
Bachelor of Engineering ( Result Awaited )
Chemical Engineering.
Dharmasinh Desai Institute of Technology, Nadiad
Dharmasinh Desai University, Nadiad
Diploma
Chemical Engineering , May 2005.
TRAINING :
As a part of my education,
During B.E. I have attained 1 month training in,
• Polybutadiene Rubber – IPCL , Vadodara.
During Diploma 9 weeks training each in,
• Polyvinyl Chloride – IPCL , Vadodara.
• Low Density Polyethylene – IPCL , Vadodara.
SEMINAR / POSTER PRESENTATION :-
During my B.E. I have presented a Seminar on “ Enzymatic Hydrolysis Of Heat Sensitive Oil ” in Seventh Semester.
Also I have prepared a Poster Presentation on
“Nanotechnology ”.
PROJECT :-
Name of the Project :- POLYBUTADIENE RUBBER
Duration :- Final Year
Project Details :-
The project involved production of Polybutadiene Rubber, which includes production process, mass balance, energy balance, cost estimation and safety. The project was based on the process flow diagrams, raw materials and chemicals and the equipments used for the production of Polybutadiene Rubber. The biggest producer of Polybutadiene Rubber in India is The Indian Petrochemical Corporation Ltd. ( IPCL ), Vadodara which produces 40,000 tons p.a. For further information a detailed report can be furnished by me.
SKILLS :-
Languages Known :- English, Hindi, Gujarati.
Computer Skills :- M.S. Office, C and C++ (learned during college),
Internet applications.
Other Skills :- I can play Guitar and Tabla very well.
I am also very good at Cricket, Table Tennis, Badminton, Carom.
INTEREST :- Traveling, listening music, driving, dancing.
HERE ALL THE ABOVE INFORMATION GIVEN IS TRUE AS PER MY KNOWLEDGE.
August 15th, 2008 at 5:35 am
i am chemical engg graduate of 2008 batch..i am ready to work with your company
August 18th, 2008 at 1:17 pm
I am doing chemical engineering and will be passing out in augast-09.. I have an aggregate of 65%.. I am very much interested in your company..Can i apply??..
September 5th, 2008 at 5:38 am
Respcted sir/medam,
I am mechanical final year student and complite my Degree engineering after six month.
September 5th, 2008 at 5:42 am
Respected sir,
I am B.E. Mechanical final year student from vir narmad south gujarat university,SURAT
September 17th, 2008 at 6:03 am
I am graduate(chemical engg) of 2008 batch.aggregate 61%.i am very much interested in your company.
September 22nd, 2008 at 7:15 am
i am a student of mechanical final year. i want to join production field. i am very intersted to join production industry.
September 22nd, 2008 at 10:33 am
Hi, I am Paras P. Panchal, B.E Mechanical from L.D College of Engg., Ahmedabad.
I am right now working in Vendor Development Cell of Godrej & Boyce Mfg. Ltd,Mumbai on contract Basis.
I am keen in getting placed in your company for some appropriate post.
Will be looking forward for yoyr reply
September 22nd, 2008 at 10:34 am
My Mobile Number is 09930403143 & 09909031047
September 24th, 2008 at 4:28 pm
sir,
i wold like to know if this job is still on/////// am a fresher btech chemical engineer ………would like to aplly for the job……..my cgpa at the end of 8th sesmester in 7.64
my mbl no is 09748184031
September 26th, 2008 at 11:53 am
Curriculum vitae
GULSHAN KUMAR gulshan_1604300@yahoo.co.in
V.P.O. BAWANI KHERA er.gulshanminocha@gmail.com
Distt. BHIWANI
Harayana-127032
+919466550520,09729194147
OBJECTIVE
Seeking a result oriented company having a globally competitive environment that is looking for an ambitious and career conscious person, where a blend of my acquired skills and education will be utilized on challenging assignments in a creative atmosphere, using innovative technologies that shell out a
steady-paced professional growth to my organization & me.
PROFESSIONAL QUALIFICATION
Bachelor of Technology
Pursuing course in Mechanical Engineering from Jind Institute of Engineering and Technology, JIND Harayana. Affiliated to K.U.K. with an aggregate of 70%
Senior School Certificate Examination (2003 – 2004)
Passed from BALBHAWAN Sr. Sec. School, Bhiwani, affiliated to CBSE Board, in 2003. With an aggregate of 60%
High School Examination:
Passed from D AV Public School, Bhiwani affiliated to CBSE Board, in 2002.With an aggregate of 73.4%
TECHNICAL SKILLS
Mechanical Softwares: AUTOCAD, CATIA
Others: KNOWLEDGE OF WINDOW XP, MS OFFICE.
SUMMER TRAINING
• 6 week summer training in “Amtek Auto Ltd.” Dharuhera in July 2006.
• 8 week summer training in“ PARAMETRIC CAD TECH DESIGN CENTER” (CHANDIGARH)
for learning “CATIA” in July 2007.
PROJECTS UNDERTAKEN
1 Project Name: WHEEL FASTENING DEVICE
Application: FOR FASTENING FOUR NUTS SIMULTANEOUSLY
Tools Used: WHEEL FASTENING DEVICE
Description: By using this device the time required to fasten the wheel is reduced to less
than one-fourth times taken if fasten by the current device
2 Project Name: STUDY OF LUBRICATION AND COOLING OF FOUR STROKE DIESEL
ENGINE
Application: TO SHOW LUBRICATION AND COOLING IN ENGINE
Engine Used: TWO CYLINDER FOUR STROKE DIESEL ENGINE
Description : Generally our project is a cut piece model in which we try to make all visible part of the diesel engine. Like crank shaft, crank pin, connecting rod, crank pin, piston is the basic components of automobile
STRENGTHS
• Honest
• Focused
• Hardworking
PERSONAL INFORMATION
Date Of Birth 15th NOV 1985
Home Town Bhiwani
Interests Listening soft music, Solving puzzles, Search on google.
Hobbies Playing cricket(represent school team in 10th D.A.V.
Bhiwani)
Languages English, Hindi, Punjabi (speak only).
Permanent S/o SH MADAN LAL MINOCHA
address V.P.O. Bawani Khera (Bhiwani)
Ward no. 10
PIN CODE – 127032
Declaration: I hereby certify that all the particulars stated above are to the best of my knowledge
and believe true and fair.
For any misrepresentation or omission of fact I shall be personally liable.
PLACE : GULSHAN KUMAR
October 23rd, 2008 at 9:21 am
done plc & scada course from sofcon noida willing to work in oil & gas
October 28th, 2008 at 8:37 am
dear sir/madam
i am chemical engineer , presently persuing m.tech from nit rourkela
completed my b.tech from rohillkhand university ,with 75% & having very keen interest to join your company ,
November 2nd, 2008 at 4:18 pm
i m chemical engg
i complete degree with first class
i complete my diploma with first class
i have complete autocad
November 2nd, 2008 at 5:10 pm
mail id
swati.3may@gmail.com
chemical engg
B.E with first class
and diploma with first class
November 26th, 2008 at 7:53 pm
CURRICULAM VITAE
Niraj R. Shingala
Bachelor of Mechanical Engineering
Contact Address: Contact Information:
Marketing Yard, E-mail: niraj_shingala@rediffmail.com.
Block No: M-1/6
Near R.T.O. Office, Contact No: 9904568922
Rajkot-360003 9909909522
Career Objective
• To work in a challenging results-oriented environment that seeks an ambitious and career conscious person, where acquired skills will be utilized toward continued growth and advancement.
Disciplinary Profile
DISCIPLINE : Bachelor of Engineering in Mechanical
COLLEGE / INSTITUTE : Atmiya Institute of Technology & Science, Rajkot
UNIVERSITY : Saurashatra University
Academic Qualifications
• Detail of each semester of B. E. (Mechanical Engineering) at Atmiya Institute of Technology & Science, Rajkot.
Exam Percentage Board/University Class
X std 74% G.S.E.B. Distinction
XII std 56% G.S.H.E.B Second
1st year 49% Saurashatra Second
3rd sem. 53% Saurashatra Second
4th sem. 60% Saurashatra First
5th sem. 62% Saurashatra First
6th sem. 59% Saurashatra Second
7th sem. 63% Saurashatra First
8th sem. 64.5% Saurashatra First
Personal Information
Date of Birth 14th May, 1987
Sex Male
Mother Tongue Gujarati
Language Known English, Hindi
Hobbies Cricket, Listing Music
Seminar
• I visited Sureliya wire cut company which is situated Bhaktinagar station at Rajkot.
• I visited Atul Auto Pvt. Ltd. at Shaper, Rajkot.
• I visited Thermal power plant at sikka, Jamnagar
• I also made a PROJECT on Thermal power plant at wanakbori, Thashara.
Certificate Mail
• 1. as a committee member in Project competition at A.I.T.S. College, Rajkot during Academic session.
• 2. As a committee member in Quiz competition & ROBOTICS.
• 3. As a councilor on teacher’s day.
Area of interest
• Manufacturing.
• Quality control.
• Production planning &control
Note
• I hereby declare that above mention details are true to the best of my knowledge if you favor me with an Appointment. I shall do my best to work to the entire satisfaction of my superiors.
(NIRAJ R. SHINGAL
November 27th, 2008 at 8:07 pm
I am an instrumentation engineer.. currently working in futura polyesters ltd, chennai. as a Instrumentation project engineer.i have completed one chemical plant project and now my second project is under progress.i have one year experience in electrical and instrumentation projects. i want to enter into the powerplant, chemical or refinery plant instrumentation design engineer. anybody can help me..
my mail id : rtdinesh05@yahoo.com
mobile No. (0)9994277020
December 25th, 2008 at 6:01 pm
NITIN SARDANA (B.E.Chemical)
HN 1844, WARD-10, Siwan
Distt. Kaithal, Haryana-136033
Email : coolnitin_1987@yahoo.com
Phone: +919416563777
01746-240024
CAREER OBJECTIVE
To join an organization where I can utilize my skills and abilities in fruitful manner along with challenges and responsibility.
TECHNICAL SKILLS
• Programming Languages: C, C++
• Content Studied: Mass Transfer (Distillation Column), Heat Transfer (Heat
Exchangers)
PROFESSIONAL QUALIFICATION
• 2004-2008
DCR University of Science & Technology, Murthal, Distt. Sonipat, Haryana-131039
Bachelor of Engineering in Chemical Engineering
(4-year Degree Programme)
71% aggregate
ACADAMIC QUALIFICATION
• 2003-2004
O.S.D.A.V. Public School, Kaithal, Haryana-136027
Sr. Secondary School (XIIth)
73.2% aggregate
• 2001-2002
O.S.D.A.V. Public School, Kaithal, Haryana-136027
High School (Xth)
72.4% aggregate
INDUSTRIAL TRANING & PROJECT
• Six Weeks training in High Polymer Labs Industries Pvt. Ltd. Dhudholla,
Faridabad (May-June, 2006)
Project: Study of Brine Refrigeration System.
• Six Weeks training Indian Oil Co. Ltd., Panipat (May-June, 2007)
Project: Study of Cracking in Petrochemical Crude.
• Project Undertaken: Study of Control System.
ACHIEVEMENT & EXTRACURRICULLAR ACTIVITIES
• Taken Responsibilites as “Security Committee member” and in Technova and
Rhythm 2005
• Taken Responsibilities as “Security Member & Publicity coordinator” for 2006
In Technova and Rhythm for D-CRUST Murthal.
• Achieved 2nd Prize in “Rajasthani Folk Dance” Rhythm 2007 & various events
in Technova 2006.
• Visited “NFL Panipat” for Industrial exposure.
• Best “VOLUNTEER “in annual rest in o.s/d/a/v/ public school.
• Participated in “National Conference” on Clean Technology & Cleaner Production in
D-CRUST
PERSONAL INFORMATION
• Father’s Name: Sh. Kalu Ram Sardana
• DOB: 21st March, 1987
• Interest: Listening music, internet surfing,
making friends, watching movies
• Languages: English, Hindi, Punjabi, Haryanvi
DECLARATION
I hereby declare that the information mentioned above is true to best of my knowledge.
(NITIN SARDANA)
December 25th, 2008 at 6:10 pm
I am Nitin Sardana . I have chemical enngineering with an aggregate pecentage of 71% .
Heat transfer , Process dynamic controls are my technical skills.
i have attached my C.V. In this post . please look into this.
December 26th, 2008 at 5:55 pm
Completed b.tech in chemical engineering in sum,2008 with first division.
Completed PG in piping and designing course in pune on 7th oct,2008.
interested to work with your organisation and ready to join as early as possible.
Eagerly waiting for positive response.
thanking you.
regards,
saurabh sarage
9921288597
January 9th, 2009 at 11:46 am
i am doing b.e. from g.u. i am in last sem. i am in mechanical field. i have knowleged pro\e.till 6th sem my agrrigate 66.55%.
January 16th, 2009 at 12:54 pm
Respected sir,
I am ramakant panchal b.e. mechanical from government engg.college valsad with first distiction. Give me chance for interview.
I am keen in getting placed in your company for some appropriate post.
Will be looking forward for yoyr reply.
yours faithfully
panchal Ramakant
0-9924397362
January 28th, 2009 at 6:14 pm
hi, i am diploma electical engineer, & i am intrested to work in this comapany. how can i apply for the trainning in essar oil ltd. in jamnagar . pls help me to apply.
February 13th, 2009 at 3:24 pm
hi i m sumit kumar
finalk year engineering student and my decipline is chemical engineering
i want to know how i can apply for essar oil.
March 7th, 2009 at 1:48 am
hi i am prashant rana from himachal. i have done my b.tech with 64 % in hpu. i have 6 months experience from hydroelectric power project.
i want to join ur company. how can i apply for the trainning in essar oil ltd.
March 7th, 2009 at 1:49 am
hi i am prashant rana from himachal. i have done my b.tech with 64 % from hpu. i have 6 months experience from hydroelectric power project.
i want to join ur company. how can i apply for the trainning in essar oil ltd.
March 23rd, 2009 at 10:16 pm
Good Day,
I am Olanrewaju Dare From Nigeria. I have a diploma Certificate in mechanical from a technical school with 6 months experience in Breweries. I also have have certificate in Health safety and enviroment.how can i apply for the trainning in essar oil ltd.Thanks
April 6th, 2009 at 3:29 pm
hi,sir.
hope you will be fine there.
i am pursuing my engineering studies for mechanical discipline from gujarat university.(B.E. IN ME.)
I am applying for a trainig in your organization for the required position.
Career Objective
To pursue career with a company having a Global vision that could provide me an opportunity to implement the knowledge acquired & my talent in the relevant field,
Along with a proper balance between job satisfaction & status, eventually enhancing soundly my professional skills.
Educational Qualifications
B.E. (Mechanical) pursuing, from charotar inst. of Technology, affiliated to the gujarat University , v.v.nager with 60% aggregate at the end of 2nd year.
Computer Proficiency
1 Language : C,C++.
2 Operating System : Win 98,XP,vista.
3 Software : Auto CAD.
4 General : Well versed with Internet fundamentals, MS-office.
->seminar on “MECHATRONICS”
I hereby declare that above mention details are true to the best of my knowledge if you favor me with an Appointment. I shall do my best to work to the entire satisfaction of my superiors.
March 12th, 2011 at 6:33 pm
I am fresher whith CGPA till 6th sem is 7.76, i am going to complete me B.E(Chemical) in june 2011, if there is any vacancy please let me know..
Thank you.
April 24th, 2011 at 10:28 am
sir, i have completed my BE MECHANICAL ENGG. i have completed my piping design engg and construction course.i have experience of 6 month in piping field. If there is any vacancy be informe me sir.
June 1st, 2011 at 6:36 pm
I completed B.E Mechanical and Searching for job do you have any good ideas
June 8th, 2011 at 11:23 pm
i’ve completed almost 3 years in industrial utility so kindly suggest me the best way