VFRESHERS

FRESHERS JOBS IN INDIA

CIVIL ENGG. FRESHERS <> MECHCI CADD CHENNAI – AUTOCAD JOBS

March 15th, 2008 Posted by VFreshers


Experience:0 – 1 Years

Location:Chennai

Education: B.Tech/B.E. – Civil;Diploma – Civil

Job Description: Candidate must have sound knowledge in civil with AUTOCAD 2008. Must be familiar in 2D & 3D drafting. ADT & 3MAX is also required. Must be willing to work in night shift.

Desired Candidate Profile: Candidate must have sound knowledge in civil with AUTOCAD 2008. Must be familiar in 2D & 3D drafting. ADT & 3MAX is also required. Must be willing to work in night shift.

Company Name:MECHCI CADD

Website:http://www.mechci.com

Address:Mech-Ci
Sai Complex,
3, Station View Road,
Kodambakkam
Chennai – Tamilnadu ,INDIA 600024

Email Address:hrd(at)mechci.com

Telephone:91-044-24880263,23721386, 9380291818

Apply:
If you have registered your CV with Naukri.com CLICK HERE to apply
OR 
CLICK HERE TO REGISTER YOUR CV with Naukri.com and then apply above


15 Comments

  1. # 1 ELANGO Says:

    RESUME

    NAME : B.ELANGO
    BRANCH : Mechanical Engineering
    MOBILE NO : 9382857845
    E-MAIL ID : elango.rni@gmail.com

    OBJECTIVE

    To deliver my duties to the fullest satisfaction of the superiors and subordinates and to reach responsible position in future, work for the betterment of the company in any circumstances.

    EDUCATION

    COURSE INSTITUTION BOARD/
    UNIVERSITY YEAR OF
    COMPLETION MARK
    % / CGPA
    B.TECH
    (MECH) DR.M.G.R. EDUCATIONAL & RESERCH INSTITUTE, CHENNAI. DR.M.G.R UNIVERSITY
    2007
    (8.66)/10
    (CGPA)
    H.S.C SIR. M.C.T.M. BOYS HR. SEC. SCHOOL STATE BOARD 2003 80.50
    S.S.L.C CHINTADRIPET BOYS HR. SEC. SCHOOL STATE BOARD 2001 83.65

    PROFICIENCY COMPUTER
    • Cadian 2005.
    • Knowledge in Auto cad 2007.
    • Knowledge in MS Office and MS-Access.
    • UNIX.

    INDUSTRIAL TRAINNING

    • Under gone an industrial training in “Brakes India Limited in Actuation Unit” for 20 days.

    PROJECT

    Title: “Change over time reduction in Assembly Booster line”
    Organization: TVS Brakes India Limited, Padi.
    Description of the Project:
    Our aim is to design a tool which can effectively reduce the change over time thereby increasing the production rate. This deals with the time taken to manufacture a component from the successful outcome of the previous component to that of the next component after the change over has taken place by means of new tool setup.

    EXPERIENCE

    Working as part time CAD ENGINEER in COMPUTER SOFTWARE COLLEGE (C S C) Triplicane (JAN 2006 TO TILL DATE)
    • Part time job in CSC as CAD Engineer.
    • Handling four batches per day and helping to develop the project for students.
    • Play a vital role in administrative work.
    PRESENT JOB:
    Working as a material consultant in LEONEX SYSTEMS PVT LTD.From Nov 2007-Till date.LEONEX SYSTEM is a premier consulting company in the field of Materials and Maintenance Management solutions having its operations in India, Malaysia,United States and New Zealand.
    PROJECT :SHELL-EPE
    • Reviewing the existing buying description as per big rules
    • Updating the manufacturer using mnfr abbreviation prepared by central team
    • Updating Vendor Codes and manufacturer part number
    • Reviewing mrp4

    PERSONAL DETAILS

    Name : B. ELANGO
    Date of birth : 13/08/1985
    Passport no : G5124095
    Father’s name : M.BABU
    Languages know : Tamil and English
    Marital status : Single
    Permanent address : 27/14, Trans port Line,
    Pudupet,
    Chennai- 600002.

    DECLARATION:

    I hereby declare that the above-mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above-mentioned particulars.

    Place: Chennai [B.ELANGO]
    Date:

  2. # 2 S.MANIVANNAN Says:

    Iam manivannan from Chennai . Now, Iam doing my B.E CIVIL ENGINEERING IV Year (final year). I would like to join start my carrier in your esteemed organisation .

  3. # 3 gopalakrishnan.m Says:

    reply.jobs to my mail please

  4. # 4 SARANGAN Says:

    I am sarangan from chennai. Now i am working in furniture company as a
    CADD DESIGNER. I am looking part time job in autocad design at chennai.

  5. # 5 Anupam Says:

    We are in the DCE freshers for our project at manapakkam chennai pls contact us at 9840045998 044-22522942

  6. # 6 DILLI Says:

    I am DILLI from chennai. Now i am working in PANEL BOARD company as a
    CADD DESIGNER. I am looking part time job in autocad design at chennai.

  7. # 7 Sebastin Says:

    Hi, I m Sebastin. Wright Now I m Working in Private Company and Studying Part Time B.E. Final Year, I want to Auto Cad Jobs For Civil Engg, in Chennai

  8. # 8 Hi! This is Indra . I'm doing B.E civil Engg(part time). I have 4 years experience with AUTO CAD.......Now I'm searching for job Says:

    I know about this is one of my friend…….. its very faster to reach our suitable career ……… thats why I have submitted my needs here……….
    I want suitable Auto Cad Civil Job………

    Thank you…………..

  9. # 9 mohammad apsar Says:

    hi this is apsar , i have completed my b-tech in the stream of mechanical engg fresher looking for a good carrier in design such as autocad and catiav5, ia hve little bit of basics learned i hope this will definetly help me to build a good carrier

  10. # 10 sneha Says:

    Hello this is Sneha from Hyderabad. I am working as a Government servant as junior engineer since three years. I am into the construction of a multi storied residential building consisting of Stlit + 7 Floors and able to draw all the plans in auto cad 2D very fastly and has much experience in MS office. As i am thinking of doing a part time job in my free time i am writing this mail. I am looking part time job in autocad 2D at Hyderabad. i hope i recieve the positive response to my mail.
    thanking you
    sneha

  11. # 11 justine tharu p Says:

    Dear sir,
    I am justine.i just did Diploma $ B-Tech in civil eng.I have 2year experiance in construction company.please inform me if there is any vacancy for me.
    yours faithfully
    justine

  12. # 12 ramakrishnan Says:

    hi people,

    need part time CAD designers

    Contatct : ramakrishnan_@hotmail.com

    Send me some of your samples

    Candidate who can start immediately only apply

  13. # 13 s.manoj kumar Says:

    i request to cad designer job

  14. # 14 sarangan Says:

    hi,i would like work with part time job in Autocad Design.So if you have any part time job in Autocad Design please contact this no:9884346907

  15. # 15 Rajeshwari Says:

    hi i am Rajeshwari from Bangalore I would like to receiptionist job in hotel or restaurant. if you have any job please contact
    9844505467.

Leave a Reply