VFRESHERS

FRESHERS JOBS IN INDIA

SUZLON ENERGY – PUNE <> MECHANICAL ENGINEERING FRESHERS JOBS

August 27th, 2008 Posted by VFreshers


Company Profile : Suzlon Energy is Asia’s strongest growing fully integrated wind power company and ranks amongst the top ten in the world. Suzlon integrates consultancy, design, manufacturing, operation and maintenance services to provide customers with total wind power solutions.

Experience:0 – 5 Years

Location:Pune

Education: B.Tech/B.E. – Mechanical

Job Description :  Mechanical measurements like, Torque, Noise and Vibration, Shaft alignment, Geometrical dimensional measurements using Laser instruments & Portable CMM etc.
Measurement data analysis and report generation.
Technical Audits at sites & plants in relation to measurements.
Having good knowledge to identify the needs of testing and measurements equipment selection
Preferred experienece in Instrument repairs & calibrations having good awareness of electrical and electronics.

Company Name:Suzlon Energy Limited

Address:Suzlon Energy Limited
2nd Floor
Godrej Millennium
9 Koregaon Park Road
Pune,Maharashtra,INDIA 411001

Telephone : 91-020-66022000       

Website: http://suzlon.com//


15 Comments

  1. # 1 vivek Says:

    Sir,
    I wish to apply to the above mentioned job.Please send a reply .I have enclosed my cv earlier

  2. # 2 surendra mohan jangid Says:

    sir i am sending my C.V. for the job in field of mechanical engineering if there requirement in this industry and i am fresher and would like work with this company.

  3. # 3 surendra mohan jangid Says:

    Sir i am fresher boy in mechanical engineering and sending my cv for the post mechanical engineer fresher in this company

    CURRICULUM VITAE

    SURENDRA MOHAN JANGID Address: – Near Gurudwara, Punjabi Mohalla,
    (Mechanical Engineer) Govindgarh (Alwar) Rajasthan
    PIN-301604
    Contact No. :- 09887787031, 09461039827.
    Email: – surendra_jangid13885@rediffmail.com
    smjbittu@gmail.com

    CARIEER OBJECTIVE:-
    To be work with a reputed, professional and progressive organization where I can show my potential skill and get good position in company. Seeking a position with a dynamic organization that provides me with the opportunity to apply my educational and creative skills which I have acquired and challenges me to expand my field of knowledge.

    ACADMIC OUALLIFICATION:-

    • Secondary School Exam With 57.17% From Rajasthan Board of Sec.Edu. Ajmer in 2000.

    • Senior Secondary School Exam With 65.69% From Rajasthan Board of Sec.Edu. Ajmer in 2003.

    Technical Education:-
    B.E. (MECHANICAL ENGINEERING) From Rajasthan University in 2008.

    Name of Exam.
    Name of University Year Percentage
    I st Year University of Rajasthan, Jaipur 2005 62.2%
    III Sem. University of Rajasthan, Jaipur 2005 65.6%
    IV Sem. University of Rajasthan, Jaipur 2006 51.6%
    V Sem. University of Rajasthan, Jaipur 2006 59.7%
    VI Sem. University of Rajasthan, Jaipur 2007 59.3%
    VII Sem. University of Rajasthan, Jaipur 2008 53.2%
    VIIISem. University of Rajasthan, Jaipur 2008 75.5%
    Total Average 61.02%

    COMPUTER SKILLS:-
    Operating Systems : Windows XP/98.
    Application Software : Microsoft Office, Excel etc., AutoCAD

    FUNCTIONAL AREA:-
    Production Planning Control, Maintenance, Manufacturing,
    Quality Control, Design.

    TRAINING & PROJECTS:-

    B.E. Pre Final Year:
    Organization : Mittal Forging & Component (P) LTD.
    Location : Bhiwadi (Alwar), Rajasthan
    Duration : 30 Days.
    Area of Work : CNC Turning and it’s programming &
    Other Operation that perform on it.
    Project Name:
    THE MARK (An Automatic Road Marker).
    Seminar:
    Micro Machining Processes.

    HOBBIES: –
    Gathering of Technical knowledge, Reading News Paper, Listen the music, Cricket, Web Surfing.

    PERSONAL DETAIL:-

    Name Surendra Mohan Jangid
    Father’s Name Sh.Munna Ram
    Date of Birth 13 Aug. 1985
    Permanent Address Near Gurudwara,Punjabi Mohalla,
    Govindgarh, (ALWAR) Rajasthan 301604
    E-mail surendra_jangid13885@rediffmail.com
    Gender Male
    Marital status Unmarried
    Language Known English & Hindi
    Major strengths Loyal to the employer, Quick to learn, Hard working and sincere.
    Nationality Indian
    Religious Hindu

    DECLARTION:-

    I hereby declare that the information provided above is correct up to my knowledge.

    Date:-
    SURENDRA MOHAN JANGID
    Place:-

  4. # 4 MECHANICAL/CIVIL ENGINEERING FRESHERS JOBS « VFreshers.com Says:

    […] SUZLON ENERGY – PUNE <> MECHANICAL ENGINEERING FRESHERS JOBS http://www.vfreshers.com/suzlon-energy-pune-mechanical-engineering-freshers-jobs/ MECHANICAL DIPLOMA – 2008 PASS OUTS FRESHERS JOBS IN BANGALORE <> FLOWSERVE INDIA CONTROLS […]

  5. # 5 Pawan Gahlawat Says:

    PAWAN GAHLAWAT
    GH-9/135
    PASCHIM VIHAR
    NEW DELHI 1100-87
    Pawan_gahlawat02@yahoo.co.in
    09811232298, ® 011-25286014

    CAREER OBJECTIVE

    To be a part of a reputed organization, this provides steady career growth along with job satisfaction and challenge, so that valuable contribution can be made in the success of the organization.

    PROFESSIONAL QUALIFICATION

    Completed B.TECH in mechanical from Chandigarh engineering college, mohali (Punjab) with 70%.

    MASTERS:

    Pursuing POST GRADUATE DIMPLOMA IN MATERIAL MANAGEMENT from IMT GHAZIABAD through distance learning.

    ACADEMIC QUALIFICATION

    1. Pursued Matriculation (from C.B.S.E) in 2001
    2. Pursued Higher secondary (from C.B.S.E) in 2003

    EXPERIENCE / CURRENT PROJECTS

    Working with RICO AUTO INDUSTRIES LIMITED as a GET (development and engineering) in GURGAON.

    CURRENT PROJECTS

    • VALUE ENGINEERING
    • DEVELOPING OTHER PROJECTS LIKE BMW CASE DIFFRENTIAL, FORD TURBINE HOUSING, CONTINENTAL, HONEYWELL, MARUTI ETC

    TRAINING / PROJECTS

    Undergone industrial training as per university schedule:

    O Completed 6 weeks industrial training program at BAJAJ MOTORS LTD. GURGAON in PRODUCTION.

    O Completed 6 month’s industrial training at MARUTI UDYOG
    LTD GURGAON in PPC AND PKC DEPT.

    FINAL YEAR PROJECT (working project)

    Objective: Aim of the Project
    The Aim of the project is to develop Automated Guided Vehicle with Dynamic Path Selection, Collision Avoidance & Addressing Mechanism.

    COMPUTER SKILLS

    1. Platform : MS.DOS, Microsoft Office, Window 9X
    2. Basic knowledge of computer
    3. Knowledge of C and C++
    4. Done AutoCAD from Autodesk 2D and 3D.

    STRENGTH

    1 Adaptable nature
    2 Efficient in working with a team
    3 Dedication, sincerity, hard work and efficiency.

    INTERSTS AND HOBBIES

    PLAY CRICKET, WATCHING DISCOVERY CHANNEL, LONG DRIVE

    PERSONAL DETAILS

    DATE OF BIRTH : 5TH FEB 1986
    FATHER’S NAME : MR. PREET SINGH
    MOTHER’S NAME : MRS SAVITRI DEVI
    MARITAL STATUS : SINGLE
    LANGUAGE KNOWN : HINDI, ENGLISH
    PHONE NO. : ® 011-25286014, 09811232298
    E-MAIL ADDRESS : PAWAN_GAHLAWAT02@YAHOO.CO.IN

    REFRENCES

    1. SAURABH KAINTH
    ASSTT. MANAGER (PLANT CONTROL DIVISION)
    MARUTI UDYOG LIMITED, GURGAON (9811190169)
    2. S.G MANI
    MANAGER (PRODUCTION PLANNING CONTROL)
    MARUTI UDYOG LIMITED GURGAON.

    PREFERED LOCATION AND CURRENT SALARY

    As per company requirement
    2 LAC PER ANNUM CTC
    (PAWAN GAHLAWAT)

  6. # 6 Sachin Ankushrao Says:

    Sir I am fresh Mechanical engineer . Sir I am very much interested to work in this highly growing organisation. please Sir if there is any requirement for the freshers in your organisation just call me otherwise mail me.

    Mb. no. – 9970814440

    Thanking you

  7. # 7 Swapnil L. Inamdar Says:

    Respectd sir,

    I am Swapnil L. Inamdar, completed my degree in MECHANICAL ENGINEERING,with 67.71% from SGBAU University. I have done design course Pro/E wf4.0 from MIT PUNE, as well as searchin for job . Also i am interested to do a job with your organisation. Hence I am sending you my resume for the same.

    Thanks with regards

    Swapnil L.Inamdar

    RESUME

    Swapnil Laxmanrao Inamdar
    Fathers name:- Laxmanrao . V. Inamdar

    Objective
    To associate myself with dynamic organization that utilizes my knowledge, education, creative talent in Mechanical engineering and commitment to excellence & honesty.

    PERCENTAGE IN B.E. 67.71%

    Computer Literacy

    • Certificate Course in Pro/Engineer Wildfire 4.0 {Solid Modelling, Advanced part
    Modelling, Assembly, Surfacing, Drafting, Machining.}
    • Certificate Course in Solid Edge V-14.
    • Basic knowledge about Auto-CAD.

    Educational Performance
    Course University/Board Year of passing Percentage Division
    VIII th Sem B.E. Amravati Summer –2008 74.00% I
    VII th Sem B.E. Amravati Winter –2007 61.42% I
    VI th Sem B.E. Amravati Summer –2007 64.14% I
    V th Sem B.E. Amravati Winter –2006 59.42% II
    IV th Sem B.E. Amravati Summer-2006 64.93% I
    IIIrd Sem B.E. Amravati Summer –2006 52.64% II
    II nd Sem B.E. Amravati Summer-2005 61.66% I
    Ist Sem B.E. Amravati Winter-2004 57.83% II

    H.S.C Amravati June-2004 66.67% I
    S.S.C. Amravati June-2002 66.93% I

    Key Projects done…

    • “Case study on Energy Audit of Induction Furnace (B.E.)
    An energy audit is an inspection, survey and analysis of energy flows in process. Typically an energy audit is conducted to seek opportunities to reduce the amount of energy input into the system without negatively affecting the output(s).

    Seminar

    • “TWEEL: Advance trends in tyre Industries”. (B.E.)
    The Tweel (a portmanteau of tire and wheel) is an experimental tire design being developed at Michelin. The tire uses no air and therefore cannot burst or become flat. Instead, the Tweel’s hub connects to flexible polyurethane spokes which are used to support an outer rim and assume the shock-absorbing role of a traditional tire’s sidewall.

    About Projects done in Pro/Engineer WF 4.0 .
    • Solid Modelling, Advanced part Modelling, Assembly, Drafting, of cylinder block.

    Extra curricular & Special Achievements…

    • Represented for Collage theatre team at University level.
    • In social gathering, winner of theater event for two consecutive years.
    • Blood donation & Active membership of N.S.S. at college level in 06-07.

    Personal Skills
    • Capacity for self-motivation & quick learning skill.
    • Keen instinct to quickly effect change & improvement.
    • “Team player” attitude & spirit.

    Personal Information

    Date of Birth…………-08/02/1987
    Age & Sex…………..- 21 yrs. & Male nationality…………- Indian.
    Hobbies & Interest…- Watching TV,
    Mimicry & Watering the plants.
    Language Known…- English, Hindi and Marathi.

    Declaration

    I hereby affirm that the information in this document is accurate and true to best of my knowledge.

  8. # 8 saurabh Says:

    sir i am sending my C.V. for the job in field of mechanical engineering if there requirement in this industry and i am fresher and would like work with this company.

  9. # 9 brij bhushan Says:

    sir i am sending my C.V. for the job in field of mechanical engineering if there requirement in this industry and i am fresher and would like work with this company.

  10. # 10 shrirang kale Says:

    Dear sir
    i m be mechanical fresher and finding a job as mech engg now i had completed catia v5r16 my deg is of 70% please reply

  11. # 11 shantanu Says:

    sir,
    I am Fresher B.E.Mechanical Engineer.my deg % is 67.86.Do Reply.

    RESUME

    SHANTANU P. TIJARE

    Personal Details:-

    Name: – SHANTANU PRADEEP TIJARE

    E-mail:- shantanu_tijare2006@yahoo.co.in

    Contact no: – 9975640417
    Date of birth: – 25 Oct, 1986.
    Gender: – Male
    Marital Status: – Single.
    Languages Known: – Marathi, Hindi, English, German.
    Career Objective:-

    Securing a dynamic position in a company that utilizes my technical skills and allows professional growth.

    Educational Qualification:-
    Pre-Engineering Qualification

    Class School/College Year Percentage Marks
    S.S.C Somalwar High school, Nagpur. 2002 85.06
    H.S.C. Dinanath Jr College, Nagpur 2004 81.33
    Mechanical Engineering Qualification

    Class College University Year Of Passing Percentage Marks
    8th sem YESHWANTRAO CHAVAN COLLEGE OF ENGINEERING. RASHTRASANTTUKADOJI MAHARAJ NAGPUR UNIVERSITY 2008 70.5
    7th sem 2007 64
    6th sem 2007 70.8
    5th sem 2006 65
    4th sem 2006 66
    3rd sem 2005 62.88
    1st year 2004 60.88
    Engineering Average:- 65.50%

    Technical Skills:-

    Operating System: Windows 98/XP.
    Languages known: Basic knowledge of C.

    Projects Undertaken:-

    § A Project Done:
    Ø Title:- Design and Fabrication of an Ornithopter
    Ø Overview: -An ornithopter is a device, which flies by flapping. In this project a model of mechanized bird is designed, manufactured and tested by using motors of different RPM.
    ? A Mini Project Done:
    .Title:- Vane anemometer
    Ø Overview: -A project on ‘Vane Anemometer’ which determines the velocity of
    air mechanically.

    § Seminar on Technical Trends in Fuel Injection System:-
    Ø Overview: – A seminar was presented on ‘Technical Trends in Fuel Injection
    System’. The working, components, advantages of F.I. system are
    discussed.

    § Industrial Training:-Undergone an industrial training in ‘Alpha Remedies’ for 7
    days.
    ? Industrial Case Study: – A case study on Electrostatic Precipitator is done in ‘Koradi
    Thermal Power Station’
    Extra Curricular Activities:-

    § Stood 2nd in a MIMICRY competition
    § Organized a quiz competition in YCCE_FEST.
    § Motivator in BLOOD-DONATION CAMP.
    § Participated in MIND-SKILL workshop.

    Co Curricular Activities:-

    · Participated in a national level AERODROME work-shop
    · Presented a paper on ‘Advanced Materials with Application’ in national level competition ICON_2K6.

    Strengths:-
    Honesty, Live with acceptance and friendship, hard work.

    Hobbies and Interest:-
    § Listening and singing Indian Filmy music.
    § Interested in Cars.
    § Mythology.
    Declaration:-
    The above information is true to the best of my knowledge and belief.
    TIJARE SHANTANU P.
    Place: Nagpur
    Date:

  12. # 12 VIRAL N. PATEL Says:

    I have completed my degree in mechanical engineering in 2008 from G.H.Patel college of engg. and technology, Vallabh Vidyanagar,Gujarat.
    MY aggregate score is 65.56%(1st class).
    I studied energy management in last semester and also studied CFD software.
    I am very much interested in energy field.
    good knowledge of turbines…
    i also gave a presentation on wind energy in college…
    so please do the needful and reply…..

  13. # 13 Mahendra Kedari Says:

    I am BE(Mechanical) passout in 2008 from JSCOE,pune.

    My BE score is 63%.

    i hv completed my hypermesh,ANsys,UG,Pro-E CAD course.

    i hv experince of training at YOUR COMPANY At DAMAN.

    i hv experince of 15days training in ACCURATE GAUGES,pune

  14. # 14 SHIVANAND Says:

    RESUME

    Shivanand.K.Tuppad,
    S/o K.T.Tuppad,
    Post: Gadag,
    Email: shivu_2121@rediffmail.com
    Email: shivu2121@gmail.com
    Phone No: 9769085641

    OBJECTIVES:

    ? Work in an environment that provides opportunities to prove my skills and to learn new skills.
    ? Avenues for meaning full interpersonal relationships.

    EDUCATIONAL QUALIFICATION:

    ? B.E: In Mechanical Engineering from Basaveshwar Engineering College, Bagalkot with 69.21 % aggregate (1st to 8th).
    ? II PUC: from J.T.College, Gadag with 70.83%.
    ? S.S.L.C: from Loyala High school, Gadag With 89.12%.

    SOFTWARE EXPOSURE:

    ? AUTOCAD.
    ? Windows XP, MS word, Excel etc.

    ? PERFORMANCE ANALYSIS OF HEAT EXCHANGER WITH AND WITHOUT DOVETAIL FINS.

    ? OPTICAL FIBERS.

    ? Material science, Thermodynamic and Machine Design.
    ? Production, Design and RD.

    ? 6th semester: Theory of Elasticity.
    ? 7th semester: Finite Element Methods, Computer Integrated Manufacturing.
    ? 8th semester: Product Design & Manufacture, Industrial Robotics.

    Professional Experience:
    Techno-Link Services, Mumbai
    • Dealing with MEKAR (An Italian MNC) and VENTILCLIMA.
    • Providing selection of Air Handling Units, Fresh Air Handling Units based on air flow rate, DBT and WBT, chill water temperature, total capacity, sensible capacity, room temperature etc..
    • Includes costing, selection sheet preparation and offer recommendation.
    • Present profile concerned with the equipment selection, cost analysis, preparing checklist for projects, technical submittals, preparing compliance statements.

    PERSONAL INFORMATION:

    Father’s name : Shri Kariyappa.T.Tuppad
    Mother’s name : Smt: Basavva.k.Tuppad
    Date of Birth : 12th Dec 1986
    Nationality : Indian
    Sex : Male
    Marital Status : Unmarried
    Hobbies : Swimming, Cricket, Traveling.
    Languages known : Kannada, English and Hindi.

    DECLARATION:

    I here by declare that the information provided above is genuine and true to the best of knowledge. If given an opportunity to work in your organization, I will put my best efforts.

    Place: Bagalkot. Shivanand Tuppad

  15. # 15 HIMANSHU VERMA Says:

    Respected Sir/ Madam,

    This is himanshu verma from
    INTERNATIONAL SCHOOL OF BUSINESS AND MEDIA, PUNE(www.isbm.ac.in),
    Pursuing BBA (bachelor of business administration),now in 2nd yr.
    want to complete one project /internship from your company or something similar like that which would give me an experience certificate.

    i am well interested to work on my project from your company unit
    which will be helping to shape my career and gain industrial exposure.

    Although i have maintained good academic records in my schools and
    now in college, i have also scored good percentages on my academics.

    I am interested in this field of work/project and the only thing i
    need is one permission from the company to undergo this
    internship.
    please see my resume below this statement and kindly reply me as
    soon as possible.

    I will be very grateful to your company to help me in shaping my
    career.

    my resume:

    INTERNATIONAL SCHOOL OF BUSINESS & MEDIA, PUNE
    BACHELOR OF BUSINESS ADMINISTRATION (2007 -2010)

    Name : HIMANSHU VERMA
    Date of Birth : Dec 16, 1989
    Contact Address : ANJOR-‘B’ Flat no: 701, 7th floor, Baner Mahalunge
    Road. BANER-45, Pune, Maharastra

    Permanent Address : Himanshu verma
    C/o- Arun kumar verma, Rajpara, Near Mangla Mandir. Post-Raniganj (713347), w.b.

    Phone:
    +919970039963
    Email :
    himanshu_4055@yahoo.co.in
    himanshuinrnj@gmail.com

    PERSONAL DETAILS :-
    EDUCATIONAL QUALIFICATIONS :

    International School of Business & Media, Pune 2007-2010
    BBA-(Bachelor in business administration) Awaited
    D.A.V Model School , Durgapur (w.b) 2005-2007
    Commerce stream (H.S.C) Ist division + distinction 82.00%
    D.A.V Public School , Raniganj (w.b) 2004-2005
    (S.S.C–) I st Division 74.00%
    LANGUAGES KNOWN:
    READ WRITE SPEAK
    • ENGLISH YES YES YES
    • HINDI YES YES YES
    PROJECT AND LIVE ASSIGNMENTS :

    • DONE A HOUSEHOLD SURVEY TO DETERMINE ECONOMIC CONDITIONS OF THE AREA IN BANKURA DISTRICT OF WEST BENGAL .

    • COMPLETED THE ACCOUNTS PROJECT WORK ON FINANCIAL ANALYSIS OF SUN PHARMACEUTICALS .

    • ALSO MADE ANALYSIS PROJECT OF SOME MAJOR SHARES AT BSE.

    AWARDS AND ACHIEVEMENTS :

    • RECEIVED 100% ATTENDANCE AWARD FOR MY ACADEMICS IN STANDARD 12TH SESSION.
    • PARTICIPATED IN ORGANISING TEAM OF INTERCOLLEGE “FIESTA” AND OTHER CO – CURRICULAR ACTIVITIES.
    STRENGTHS :

    • COMPUTER SKILLS IN MS-OFFICE , DEALING WITH POWERPOINT PRESENTATIONS.
    • INTERNET PROFICIENCY SKILLS…
    • GOOD ACADEMIC RECORDS, PUNCTUALITY, SINCERE AND HARDWORKING.
    HOBBIES :

    • GAINING PROFESSIONAL SKILLS .
    • PARTICIPATING IN QUIZZES , DEBATES ,AND GROUP DISCUSSIONS.
    • PLAYING GUITAR AND SET OF DRUMS , RIDING MOTORBIKES .
    • PARTICIPATING IN ADVENTUROUS GAMES AND SPORTS.
    MY GOAL :

    • TO BE AN ALL ROUNDER AND FINALLY TO BE A SUCCESFUL BUSINESS EXECUTIVE TO PROMOTE COUNTRY’S AS WELL AS ORGANISATIONAL / COMPANY’S GROWTH.

    DECLARATION:—– The information provided above is correct to the best of my knowledge.
    Place : pune(Maharashtra),INDIA
    Date : 06/02/2009. Himanshu Verma

    THANKS,
    Himanshu Verma (BBA),ISBM, PUNE.
    phone-9970039963

Leave a Reply